$640.00
Channels
1
Temp. Range
14 to 140 °F
Construction/Material
Aluminum Housing-IP 65
Power Required
± 6 to ± 18 Vdc or 12 to 36 Vdc
Transducer- Excitation
1 V rms 5 kHz, 25 mA Vdc
Transducer- Inputs Accepted
± 250 mV Max
Transducer- Calibration Method
Potentiometer
Transducer- Bridge Resistance Min.
120 ohms
Amplifier- Accuracy
± 0.04 % F.S.
Analog Amplifier-Output
± 4 or ± 10 Vdc depending on load or 4-20 (3 wire) into 550 Ohms Max
Amplifier-Bandwidth
Flat to 500 Hz
Dim. D
1.34 Inch
Dim. L
6.0 Inch
Dim. W
2.50 Inch
Note
For Dimensions see PDF full specifications
Accessory Items1
AC/SOT, Assembly and Calibration of Transducer to Instrumentation ($185.00)
DCM 482 – LVDT Signal Conditioning Module
$640.00
Description
Specifications
Channels
1
Temp. Range
14 to 140 °F
Construction/Material
Aluminum Housing-IP 65
Power Required
± 6 to ± 18 Vdc or 12 to 36 Vdc
Transducer- Excitation
1 V rms 5 kHz, 25 mA Vdc
Transducer- Inputs Accepted
± 250 mV Max
Transducer- Calibration Method
Potentiometer
Transducer- Bridge Resistance Min.
120 ohms
Amplifier- Accuracy
± 0.04 % F.S.
Analog Amplifier-Output
± 4 or ± 10 Vdc depending on load or 4-20 (3 wire) into 550 Ohms Max
Amplifier-Bandwidth
Flat to 500 Hz
Dim. D
1.34 Inch
Dim. L
6.0 Inch
Dim. W
2.50 Inch
Note
For Dimensions see PDF full specifications
Accessory Items1
AC/SOT, Assembly and Calibration of Transducer to Instrumentation ($185.00)
Related products
LFS 210 2.5K – S Beam Load Cell
$395.00 Add to cartLFS 242 10 – Tension/Compression Cell
$1,150.00 Add to cartLFS 210 2K – S Beam Load Cell
$395.00 Add to cart