Model LAC65.1-E is a universal analog amplifier for static/semi-static weighing applications in adverse industrial voltage outputs. It can be mounted to a variety of DIN rails and uses robust terminals for worry free connections.
Model LAC65.1-E is a universal analog amplifier for static/semi-static weighing applications in adverse industrial voltage outputs. It can be mounted to a variety of DIN rails and uses robust terminals for worry free connections.
The AC load cell excitation voltage assures lasting stability which is critical for analogue amplifiers. The AC voltage provides the advantage of EMI mitigation as well as suppression of the effects from thermal-electric effects. Both voltage and the current outputs are available simultaneously enabling dual readouts at separate locations. Low excitation voltage allows for low bridge resistance (40) preventing errors from thermal drift. Gain and zero adjustments do not affect each other. With the use of DIP-switches and precision 25 turn potentiometers, resolution of adjustments are maximized. With the wide input voltage range and isolated power supply, the LAC65.1 provides superior and reliable operation. Being manufactured since 1998, the LAC65.1 has been used and continues to be relied upon by thousands of customers worldwide.
High stability
Bipolar voltage output ±10v
Current output 0-20 or 4-20ma
Can drive up to 8 pc 350 ohm load cells or 24 pc 1000 ohm load cells
Features
Extreme stability and reliability in adverse industrial environments.
Both Bipolar voltage output (±10V) and current output 0-20 or 4-20mA, with ability for simultaneous output.
Can drive up to 8 Pc 350 ohm load cells or 24 Pc 1000 ohm load cells.
Wide range of gain with virtually no zero drift enables a live range down to a few percent of the load cell’s rating.
Wide range of the low pass input filtering from 33 to 0.33Hz to meet any requirement.
AC excitation voltage (425Hz) cancels interference from EMI and thermal-electric effects from poor electrical connection.
Low 2.5V excitation voltage effectively prevent load cell warm up errors.
The layout of the front and the LED indicators simplifies set-up and calibration.
LAC65.1-E Universal Analog Amplifier (enclosure)
$505.00
Model LAC65.1-E is a universal analog amplifier for static/semi-static weighing applications in adverse industrial voltage outputs. It can be mounted to a variety of DIN rails and uses robust terminals for worry free connections.
Description
Model LAC65.1-E is a universal analog amplifier for static/semi-static weighing applications in adverse industrial voltage outputs. It can be mounted to a variety of DIN rails and uses robust terminals for worry free connections.
The AC load cell excitation voltage assures lasting stability which is critical for analogue amplifiers. The AC voltage provides the advantage of EMI mitigation as well as suppression of the effects from thermal-electric effects. Both voltage and the current outputs are available simultaneously enabling dual readouts at separate locations. Low excitation voltage allows for low bridge resistance (40) preventing errors from thermal drift. Gain and zero adjustments do not affect each other. With the use of DIP-switches and precision 25 turn potentiometers, resolution of adjustments are maximized. With the wide input voltage range and isolated power supply, the LAC65.1 provides superior and reliable operation. Being manufactured since 1998, the LAC65.1 has been used and continues to be relied upon by thousands of customers worldwide.
Features
Dimensions
Specifications
Input
Linearity
<0.005 % of full scale.
Load cell excitation voltage
2.5 Vac 425Hz
Load cell drive capability
RLC 40-2000 ohm
Load cell wiring system
6 wires inclusive sense
Load cell input range for full output
±0.17mV/V to ±3.3mV/V.
Load cell input resolution
<100 nV (>50 000 increments at 2 mV/V input)
Zero/Gain
Zero coarse, binary increments
±2.4mV/V as 32 incr. of each 0.075mV/V input
Zero fine trim, 25 turn potentiometer
0.1mV/v, trim resolution <0.5uV/V
Gain coarse, binary increments
1*-32* relative as 32 incr. of each 1*
Gain fine trim, 25 turn potentiometer
1-2* trim resolution <0.005*
Optional gain set
10*-320*
Zero/Gain change influence on zero
0.045%FS/1*gain change
Input filters
First filter: Fixed 2nd order:
32Hz cut off frequency (5ms)
Second filter: Adjustable 1st order
32-0.25Hz cut off frequency (5ms-640ms)
Analog output
Current output range
0-20mA or 4-20mA (reversed current protected)
Voltage output range
0-±10Vdc
General
Off-set deviation between VOUT and IOUT
< 2%
Gain deviation between VOUT and IOUT
< 2%
Power supply
12-24Vdc ≤15% ripple; ≤3 Watt Isolated
Isolation of the Power source
>10 MΩ <1 nF >0.5kV
Influences
Temperature effect on Zero
Typical 10 ppm/°K, Max 25ppm/°K
Temperature effect on Span
Typical 15 ppm/°K, Max 30ppm/°K
Temperature range
Operating: -20°C/+50°C; Storage -30°C/+60°C
Relative humidity
0-95 % non condensing
EMI
10 V/m (1-1000 MHz) IEC801-1 level 2
Burst (Transients)
IEC 801-4 (level 2)
Electrostatic discharge to meet
IEC 801-2 (level 3)
General I/O protection, all pins
Reversed polarity, excess voltage and surge
Vibration
2.5 G operational; 5 G non-operational
Protection, environment
IP40
Dimensions
Height /length/width
L 114 mm; W 77 mm; H 35 mm incl. DIN rail clips.
Weight
130g (4.6oz) Net. (Packed 170g)
I/O pins
6 screw terminals, 3.81 mm pitch;
Mounting
Universal DIN-rail clips is provided
15 to 35mm C or Hat profile
Standards
Conform to Council Directive
CE in accordance with 93/98/EEC; 89/336/EEC
Certificate of approval
–
Certification accuracy
Class III: 10000e; 1 µV/VSI
Additional information
35 mm
77 mm
114 mm
LAC65.1-Data-Sheet.pdf
DownloadLAC65-manual..pdf
DownloadRelated products
DSCUSB, USB Strain Gauge/Load Cell Digitizer Module
$375.00 Add to cartLAC65.1 Universal Analog Amplifier
$450.00 Add to cartDCM 482 – LVDT Signal Conditioning Module
$640.00 Add to cart